MIR-1002 LINE, THERMOPILE SENSORS WITH BUILT_IN THERMISTOR
FEATURES
 | Built-in thermistor makes temperature compensation easy. |
| High stability in the thermal environment |
CHARACTERISTICS WITHOUT WAVE FILTER (Ambient Temp.: 25°C)
|
Min
|
Typical
|
Max
|
Unit
|
| Sensitivity |
20.1 |
25.0 |
30.9 |
V/W (500K, DC) |
| Resistance |
8 |
11 |
14 |
K-Ohm |
| Output Voltage |
750 |
950 |
1150 |
µV (500K, DC) |
| Noise Voltage |
11.5 |
13.4 |
15.2 |
nV/ root Hz. |
| NEP |
0.37 |
0.53 |
0.76 |
nW/ root Hz. |
| Detectivity D* |
2.8 |
4.2 |
6.0 |
10cm root Hz. / W(500K, DC) |
| Thermal Time Constant |
. |
120 |
. |
mSec |
| Field Area |
. |
52 |
. |
Degree |
| Thermistor Resistance |
50 K Ohm +/- 2% |
Ambient temp.: 25°C |
| Thermal Coefficient NTC |
3840K +/- 1% |
B ntc |
| Operating Temp. |
-20 to +50 |
°C |
| Storage Temp. |
-40 to +80 |
°C |
Model
|
Wavelength, µm
|
Transmission, %
|
Sensitivity, V/W
|
Applications
|
| MIR-1002 |
6.4 - 14 |
75 |
11.5 |
Intrusion alarms and detection of heat sources |
| MIR-1002Q |
0.28 - 4.8 |
90 |
4.0 |
Light intensity measurement |
| MIR-1002S |
1 - 18 |
55 |
13.0 |
High temperature measurement |
| MIR-1002HCA |
3.4 - 3.5 |
75 |
0.5 |
Flame and gas detectors |
| MIR-1002HCB |
3.2 - 3.4 |
80 |
0.5 |
Flame and gas detectors |
| MIR-1002CO2 |
4.2 - 4.4 |
70 |
0.5 |
CO2 detectors |
| MIR-1002HCO |
3.5 - 4.9 |
80 |
3.0 |
Flame detectors |
| MIR-1002HCD |
4.7 |
65 |
0.2 |
CO gas detectors |
EXTERNAL DIMENSIONS
 
With incident radiant energy, get plus (+) output at pin 3 and minus (-) output at pin
1
Keep plus (+) and minus (-) polarity floating from ground when an operational amplifier
is used with a single power source.
Connect thermister at pins 2 and 4
Back to top
|
FUJI &
CO.(Piezo Science)
